Recent content by Mx10

  1. Mx10

    P1 lifesize head sculpt (wip)

    Aaand its done!! :D Long story short. I did a resin copy of it by slushing resin inside the mold and then breaking the plaster mold to release the resin copy. In the proses more than half of the head broke so i ended up with a broken copy of the face and crown:(. In an attempt to salvage it I...
  2. Mx10

    P1 lifesize head sculpt (wip)

    Hi guys, haven´t post any updates mainly because I ran into many problems with casting, foaming and trying to airbrush latex and wasn´t happy with the way the project was going. Still I learned a lot from my mistakes and definitely gained a lot of respect for the guys in this forum that make it...
  3. Mx10

    The Predator (2018) Trailer

    As much as I disliked the trailer , I have to admit that I smiled when the original bio appeared on screen, even if it was just displayed on a wall. About the new predators, I really don´t know how to explain it, but based on the photos and the trailer they seem to have too much of an...
  4. Mx10

    Shane Blacks The Predator

    The more I read it, the more it sounds like a good comedy:(...
  5. Mx10

    P1 lifesize head sculpt (wip)

    Ok first of all, thanks shogun your comment really motivated me to continue this project :D It took a while but I changed the texture in the whole head, made it a little wider and reworked the eyes. It´s still far from being movie accurate but the sculpt its finally ready to be molded :D.Here...
  6. Mx10

    My first predator mask sculpt

    Amazing sculpt! Love the work on the mouth and the texture, specially on the forehead.
  7. Mx10

    P1 lifesize head sculpt (wip)

    Thanks for the kind words guys :D still need to fix some things on the sculpt before I can call it finished. Never heard of a resin mold, I always thought stone was the only way to go, but resin seems like a better material overall, so I guess I will have to search more about it. Thanks for the...
  8. Mx10

    P1 lifesize head sculpt (wip)

    So I started this project quiet a while ago and after two years of not being able to work too much on it, mainly because of life getting in the way (and a good amount of procrastination:whistle:).Today I finally got around to being close to finishing the sculpt, but before attempting to mold it...
  9. Mx10

    Dred length....What is the right length.

    Screen Used Predator Dreadlock found this. Item description says 16,5 inches ,but I don´t know if every dread on a predator head needs to have the same length so I would say something around that measurement may work.
  10. Mx10

    predator head measurements

    Thank you :D, so I guess I may not be too far from a p1 head. I don´t have any pictures yet because I just started all over again yesterday ,but I will be posting some as soon as the sculpt it´s finished.
  11. Mx10

    predator head measurements

    Hi, Im new to the forum and has been trying to sculpt a p1 head for a while now, but cant find any accurate measurements (height,wide,depth) online of the movie molds head Morris Costumes used to sell.I came up with height:12,2" wide: 11" depth:11,5" but it seems a little too small for a...
  12. Mx10

    PREDATOR/PREDATOR 2 Action Figures from NECA

    Awesome new figures :D ! I hope their release date will not be delayed a lot like series 12. :unsure: Also, does someone is interested in series 13 (kenner tribute)? 
  13. Mx10

    PREDATOR/PREDATOR 2 Action Figures from NECA

    Ok, thank you   :thumbsup:
  14. Mx10

    PREDATOR/PREDATOR 2 Action Figures from NECA

    Hello, this question is about  older figures , but is something that really bothered me for a long time. Some months ago I bought  Tracker, Berserker, and  Falconer at a comic book store. I wanted to know if the ones I got were Bootlegs because they have some differences. The ones I got had...
Top