Best Glue To Fix Figures?

Discussion in 'Predator Models, Statues and Figures' started by tusky, Apr 25, 2012.

  1. tusky

    tusky Hunter

    As the title says,...
    I recently bought the Aliens NECA figure and the little darling took a header off a shelf and snapped the knee joint, not the pin but the piece that the pin goes thru.
    Can anybody recomend a good adesive to mend my poor xeno??
    My Neca Wolf also has damged caused by falls.

    Any help or suggestions will be welcome fellow hunters :)
    Here is a pic of the damage

    broken xeno.JPG
    Last edited by a moderator: Feb 27, 2015
  2. hellonearth

    hellonearth Blooded

    hey tusky, i always use "gorilla super glue- clear drying". IMO a very good bond, gotta pry that shiz apart :D drys quik too.
    tusky likes this.
  3. zuckuss77

    zuckuss77 Blooded

    Careful though it does expand.But if you want it to never come apart hes right.
  4. Folsomaticustom

    Folsomaticustom Blooded

    My Alien Warrior took a dive and broke the same way too.Weird.I never fixed it or got it or my Masked Jungle Hunter replaced but they are making P2 articulation Jungle Hunter and rereleasing the Warrior so I didnt worry about it.Just dont use normal super glue.It may hold it but probably not for very long.
    tusky likes this.
  5. hellonearth

    hellonearth Blooded

    ya sorry i was thinking about it today, do not use "gorilla glue" (regular) it does expand, and i would not suggest using it, but "gorilla" has it's own "super glue" that comes in similar bottle and similar consistancy to regular super glue, (and does not expand) dries clear, and is very strong.

    sorry i just feel like i shoulda made more of a distinction before, cause i would feel terrible if you did happen to go get regular "gorilla glue" and use it you'd have light brownish foam coming out of you xeno knee a few ours later o_O which is no good, but ya their "super glue" dries clear, fast, and strong... and doesn't expand :D promise, use it all the time.
  6. zuckuss77

    zuckuss77 Blooded

    I thought the super glue by gorilla does expand, or is there a different type of gorilla super glue? I used it at work but it was white and it expanded alittle.I used a the hell out of the the regular gorilla glue so i figured they all do.
  7. tusky

    tusky Hunter

    Thanks Guys, i will look in to this.
    Hopefully i can fix this so it will remain possable :)
  8. CYCLONE 06

    CYCLONE 06 Hunter

    I use the green and white "krazy glue" that has a picture of the guy sticking to the logo in a hard hat. Stuff is awesome.

  9. tusky

    tusky Hunter

    Big thank you to all of you with your help and suggestions (y)
    I found a "super glue" that does the job.
    Disassembled the broken leg (knee joint and ankle) and glued the broken bits back on.
    Left them for about 10hrs before reassembling them, checking first that they wil still move. :rolleyes:
    Now my xeno is back in action.
    Last night i had ago at repairing my "Wolf" figure.Poor Wolf has been broken numerous times, loose joints are the culprit!!!. :mad:
    Anyway reglued the broken foot, unfortunatly it will not be moveable due to the break in the pin attached to the foot.Glued on the back back, alwys "pings" off when the figure topples.
    Attached one of the shoulder cannons, not too sure were the other is??. Have moved the figures to a less traffic heavy part of the house :D
  10. Annunaki

    Annunaki Blooded

    I also saw someone who mods figures mention Versa Chem Plastic Welder

Share This Page