Custom P1 Build - Molding Feet 10/3/13 - Nord Predator

XilianX2010

Blooded
Hello Guys! Okay I'm being serious now! Since the last two forums I made didn't really get continued here is my official forum for my custom P1 build :) Thank you Bryan (predator666thepain666) for Usruper's P1 raw mask, and will re-start my project.

I rushed through it for Halloween and ended up wasting my money. Well I'm sitting down and doing a better job, taking my time, and saving up my money for better supplies and props from this site. Here are some pictures of my re-paint.

And note, this all done without an airbrush! So if it won't loo as good still. I still use crappy water-color brushes. I will purchase an Iwata neon, double-action, gravity-fed airbrush soon. I hear that many of the pros here use iwatas so I'm going to get one :)

Alright enough chit-chat, here's some pics of my re-paint :D

IMG_2459.jpg
IMG_2461.jpg

IMG_2463.jpg

IMG_2464.jpg

IMG_2465.jpg

IMG_2466.jpg

IMG_2467.jpg

IMG_2468.jpg

IMG_2469.jpg

IMG_2477.jpg

IMG_2478.jpg

IMG_2480.jpg

IMG_2479.jpg

I scratched this idea because I didn't like the way it was coming out, so i painted over it will grey again.
IMG_2486.jpg
IMG_2488.jpg

IMG_2494.jpg

IMG_2495.jpg

IMG_2496.jpg

IMG_2502.jpg

IMG_2503.jpg

IMG_2504.jpg

IMG_2505.jpg

IMG_2506.jpg

IMG_2507.jpg

IMG_2508.jpg


I love where this is going! :D


IMG_2501.jpg



Thanks for looking! Be sure to leave a comment and some feedback. Feedback always helps :)

-XilianX2010
 
Last edited by a moderator:

Predlethe

Blooded
Liking your colour combination!

Patience is the key to any project. Better to take your time and do it right than to rush it just for the sake of having it done.

Looking forward to seeing more! (y)
 

XilianX2010

Blooded
Liking your colour combination!

Patience is the key to any project. Better to take your time and do it right than to rush it just for the sake of having it done.

Looking forward to seeing more! (y)
Thank you :D If I had Iwata airbrush I could keep going, but this will be delayed for awhile, might as well start the armor :3
 

XilianX2010

Blooded
Hey how's it going!

Well started some other parts of my build, the Bio and the armor!

Mask and suit are put on hold. I need a AB for the mask and...Well I got to get the MR. I suit XDXD

Lol Here's some pics:

IMG_2521.jpg

IMG_2522.jpg

IMG_2523.jpg

IMG_2524.jpg

IMG_2525.jpg


One piece of the thigh armor, and Chest armor (Unpainted and Chest isn't finished)
IMG_2526.jpg


Leg Armor (Unpainted)

IMG_2527.jpg


Chest Piece On
IMG_2529.jpg


Thigh Armor
IMG_2532.jpg



Thanks for looking! Please leave feedback! And please, leave tips or any advice, I'm desperate for it :D

-XilianX2010
 

XilianX2010

Blooded
Here's an update on my Bio build! It's going to be custom made, but P1 complexion. I need a little more clay so The crown area can be more wide like he bio,right now it's still too narrow.

I'm adding PVA to the armor then I will paint them. I also need to get leather for the straps I probably won't be getting a new airbrush, dreads, or the Mr. I suit anytime soon, I'm still looking for a job.

Here's some pics of the bio :)

IMG_2622.jpg

IMG_2623.jpg
IMG_2624.jpg

IMG_2625.jpg

IMG_2626.jpg
IMG_2627.jpg

IMG_2628.jpg


It's a little uneven here, I'll try and fix it.

IMG_2629.jpg


Thanks for looking :) Please leave some feedback, and keep up to date, I'll try and post soon once I get more supplies.

-XilianX2010
 

XilianX2010

Blooded
What are you going to cast the bio in? Looking pretty good far, keep going!

Brian
If you mean make out of, i plan on making a silicone mold, with plaster wrap over as the mother mold, then use resin, but I'm unsure of which type. I plan on saving my money for the AB and Bambooie dreads once I get more money. Then I'll try molding this and casting. I need to do more research before I try any of that :)

Thanks for the feedback :D
 

XilianX2010

Blooded
Hey guys, I'm back!

Well bad news, my bio cracked so I'll have to restart that later. But I'm now saving any money I can muster, I'm saving for Bambooie dreads and Hunter's Moon dread lock beads. Also some new protective seal for it, more flexible.

Buuuuut look what I got for Christmas!
547579_575347615813803_953898398_n_zps4518e0e1.jpg

It came with a whole kit. An Iwata Neo, Iwata Ninja Jet, stencil paper, black and ink, cleaner everything. I know you guys think Neo isn't a good airbrush, but I'm getting used to it, and it's very easy for me to use. :) I'll have some pics up soon of what it looks like, but a storm is rolling in and I won't be able to work on it for a couple of days.
Thanks guys :D

-XilianX2010
 
Last edited by a moderator:

XilianX2010

Blooded
Hey guys!

Well I think I'm done with the paint job! I just need so Perma-Wet to seal it. 

I'm also saving up for the new dreads and dreadlock beads. 

Here's what it looks like! 
IMG_2820_zpsa2507887.jpg

IMG_2819_zps800c9d5f.jpg

IMG_2818_zps4a9ae35f.jpg

IMG_2817_zpsd14c907a.jpg

IMG_2816_zpse0a05bcb.jpg

IMG_2815_zps76c6cfe2.jpg

IMG_2814_zps7e82225c.jpg

IMG_2813_zps3155552e.jpg


Thanks for looking! I'll update as soon as Perma-wet is added, and even more when armor is done, and dreads are added :)
 

XilianX2010

Blooded
Hello all!

I'm back for a quick update, i did touch ups on my mask's paint job :)

I made a new chest armor piece as well, but will update soon. I purchased beads from Hunter's Moon and will buy dreads soon...hopefully soon...

Ah well, here's the pics!

IMG_2886_zps064c7db7.jpg

IMG_2887_zpsb6cbf9d0.jpg

IMG_2888_zpsabb69a04.jpg

IMG_2889_zps73912324.jpg

IMG_2890_zpsba5997f6.jpg

IMG_2891_zpsefb3b539.jpg

IMG_2892_zps493e57d7.jpg

IMG_2893_zpsbcf602a5.jpg

IMG_2894_zps914d094c.jpg

IMG_2895_zps9f7f39da.jpg

IMG_2896_zps97217a3c.jpg

IMG_2897_zps063cccc6.jpg

IMG_2898_zpscebbe177.jpg



Thanks for looking! and expect more soon!

-XilianX2010
 
Last edited by a moderator:

XilianX2010

Blooded
Hi all! 

Well I have some spare time before I get the dreads, and get the clay, so I started armatures! First I did the feet! And I looked over too UnitedHerps's forum, I was able to make my own armature. It was easy and very cheap, here's his thread:

http://www.thehunterslair.com/topic/29511-pred-feet-in-the-works/?hl=feet

I then took Plaster Wrap that I had and covered it, to make sure it was more protective and isn't to soft when I start putting clay on it.

Here's what I got so far:

IMG_2912_zps36486884.jpg

IMG_2913_zps5a121ab0.jpg

IMG_2914_zpsfe677ec6.jpg

IMG_2915_zpsf1c060d6.jpg

IMG_2916_zps232f41e7.jpg

IMG_2917_zpsf6a0f48a.jpg


Also, I tried doing a hand armature, and it didn't work, what should I use to make a hand armature?

Thanks for looking! Stay tuned for more! :D

-XilianX2010
 
Last edited by a moderator:

XilianX2010

Blooded
CalgaryBound said:
The paint up on the mask looks realy good I like it alot.Cant wait to see more pics.
I have finished the mask for now until I can seal it and get the dreads/dreadlock beads. I'm off to do more of the suit :)
 

XilianX2010

Blooded
Hello!

I have a few more updates! I made a plaster mold out of the foot duck tape dummy I did. It isn't perfect due to the plastic wrap inside it. It still works. I got more clay last night and will start sculpting one of the feet! I could probably use this armature for both feet. Here are some pics:

IMG_2920_zpsd2bcb87c.jpg

IMG_2921_zps4216fb44.jpg

IMG_2922_zps42cab4ed.jpg

IMG_2923_zps58952bbf.jpg

IMG_2932_zps579a53b1.jpg

IMG_2933_zps5d0c9040.jpg

IMG_2934_zps5f779981.jpg


Thank you for looking! I'll try to get some more sculpting done soon.

-XilianX2010
 
Last edited by a moderator:

XilianX2010

Blooded
Hello everyone! I'm back, but just a quick update! I have progressed further with the feet, and I the dread beads is finished shipped today! I'm excited to get them, and start sanding and painting. I'm also very close to getting enough for the dreadlocks. The mask is nearly complete! I just need that darn seal, or else the paint will start peeling again! :p I think after I finished the feet, I can use the clay for my bio, for I improved the armature. I plan on buying the glow-in-the-dark Halloween monster hands, and paint them. For $10, I think it'll have potential and work very well. As for the body and legs....well let's just wait until I get more clay. ;)

Also, I found some old animal jaw bones, and I plan on removing the teeth, washing and bleaching, and use that for my bone necklace. I still need to buy some leather for the armor, silicone and resin for the bio, and crap more of latex for the latex pieces. Also more paint for parts that aren't painted. I'll update more when I do more on the feet, and when the dreadlock beads arrive. 

Enough of that, here are my feet so far! (I am far from being a good sculptor...) 
IMG_2935_zps75ddbd48.jpg

IMG_2936_zpsf38de037.jpg

IMG_2937_zps0fc4b7b4.jpg

IMG_2938_zpsfdeed454.jpg

IMG_2939_zpsee8cd690.jpg

IMG_2940_zps10619c95.jpg

IMG_2941_zps134604fc.jpg

IMG_2942_zps2002de46.jpg



Since this is my custom predator, and I'm sort of un-happy with the huge gap in the foot...Should I put an additional toe in? He'll look funny with 6 toes but...have you seen the guys? I don't think an extra toe won't make a huge difference! XD

Thanks for looking! and stay tuned, I have more on the way :)

-XilianX2010
 
Last edited by a moderator:

XilianX2010

Blooded
Very quick update, just added another toe to the foot, and another side claw, this way I can make two feet out of this one without re sculpting another. It's a custom build, so he'll look a bit different. I have to get some pictures of the finished armor pieces, and the beads when they arrive. I'll have to work on the foot later, once beads are done, but I'll have to be speedy with the beads, the clay doesn't dry out, but tends to peel when not touched for awhile. I'll have to figure ot how to detail it. 

Here's what the for looks like so far:
IMG_2943_zpsc72493ca.jpg

IMG_2944_zpsa85c178d.jpg

IMG_2945_zpsb2298751.jpg

IMG_2946_zps111fe5d7.jpg

IMG_2947_zps454e283d.jpg

IMG_2948_zpse8bfb26e.jpg



I'll have pics of the armor up soon. Stay tuned :)

-XilianX2010
 
Last edited by a moderator:
Top