My Predator Armor

Discussion in 'Predator Props' started by Kryptaos, Jun 11, 2017.

  1. Kryptaos

    Kryptaos Unblooded

    I've already built a bio-mask and I'm going to be building the rest of the armor... This picture shows version 1 of the bio-mask, I am currently in the process of improving it (more dreadlocks, a new paint job, etc.). The picture itself was taken last year at my school talent show, I convinced my friend to dress up as a xenomorph

    AVP rocks.jpg
     
    Last edited: Jun 15, 2017
    rysjin7717 likes this.
  2. Kryptaos

    Kryptaos Unblooded

    I managed to upgrade the originally white LEDs to red on the bio-mask, it's currently being patched up with wood putty in preparation for another coat of paint IMG_20170612_122327_903.jpg
     
  3. LunaticNic

    LunaticNic Hunter

    Nice work on the LED's!
     
  4. Kryptaos

    Kryptaos Unblooded

    Fixing up the slash marks. I used SteelStik to fill in the rather oversized original marks and I carved the new slashes with a block printing tool while the SteelStik was hardening. I added some wood putty to smooth everything out. IMG_20170612_203623092.jpg
     
    Wreav likes this.
  5. Wreav

    Wreav Community Staff

    Great progress bud! Sanding and Symmetry work will help you get your bio into tip top shape.
     
  6. Kryptaos

    Kryptaos Unblooded

    The slash marks with more sanding 1497501844054841035590.jpg
     
  7. Kryptaos

    Kryptaos Unblooded

  8. gabri

    gabri Unblooded

    Ohhhhhh i try to find this kind of drealock everyday....thank you man
     
  9. Kryptaos

    Kryptaos Unblooded

    Glad you like it. I haven't actually had a chance to 3D print it yet, so if you 3D print it, be sure to post a picture and let me know how it turned out. It should fit dreads made out of 1/2 inch backer rod, the inner diameter of the ring is about a millimeter smaller to ensure a snug fit on the foam.
     
  10. gabri

    gabri Unblooded

    sure! i'll post a pic of the dreadlock finished......
     
  11. gabri

    gabri Unblooded

  12. Kryptaos

    Kryptaos Unblooded

  13. gabri

    gabri Unblooded

    No don t need support but i haven't pront it at maximum resolution....this is a test....and it looks awesome✌ i print the dreadlocks at maximum resolution tomorrow.....thanks man!
     
  14. Kryptaos

    Kryptaos Unblooded

    Added Scar's Blooded symbol to my mask, also started raising the "cheekbones". IMG_20170619_140021_647.jpg IMG_20170619_140109605.jpg
     
  15. Kryptaos

    Kryptaos Unblooded

    The armor itself is likely going to be Alien vs. Predator armor, the mask takes inspiration from Scar's mask and Wolf's mask.
     
  16. Kryptaos

    Kryptaos Unblooded

    Gonna round out the cheeks a bit. Note to everyone: SteelStik is GREAT for sculpting with. Incredibly useful for beefing up larger areas.

    IMG_20170620_194311066.jpg
     
  17. Isubomo

    Isubomo Hunter

    Good progress!!!
     
  18. Kryptaos

    Kryptaos Unblooded

    Last edited: Jul 3, 2017
  19. Isubomo

    Isubomo Hunter

    Love to see those printed mate... :)
     
  20. rysjin7717

    rysjin7717 Unblooded

    Love that axe bass!
     
  21. Kryptaos

    Kryptaos Unblooded

    Priming the mask, it will be silver and likely coated in urethane resin

    IMG_20170802_101812_668.jpg
     
    Jmen and Shogun like this.
  22. Kryptaos

    Kryptaos Unblooded

    Prototype dreadlock rings IMG_20170813_124036_494.jpg
     
    agh12 likes this.
  23. agh12

    agh12 Young Blood

    They look great .They have very good shape. I also did one printed in 3d and it turned out quite well in a thread.
     
  24. UglyMF

    UglyMF Unblooded

    you seem to have caught a bug in your 3D print.... :eek::lol:
     

Share This Page